How to Apply Eyebrows - Eyebrow Application Instructions

hats, turbans, wigs & gifts for cancer chemotherapy patients  
 

search  

 
 

Application Instructions for our Indelible Eyebrow Stick:

Following these instructions, you will find our Indelible Eyebrow Stick a simple and fast alternative to creating the perfect eyebrow. To  determine where your eyebrow starts and ends use our following instructions as as guide.

Step 1
 
Before applying our Indelible Eyebrow Stick, clean the skin surface. (If you have oily skin we recommend using alcohol). 
Step 2
 
Draw an imaginary line from the outside corner of your nose to the inside corner of your eye as shown in step (A) of the illustration. Place a small dot from your pencil on the imaginary line where it crosses the brow bone.

Starting from the outside corner of your nose to the outsider corner of your eye, place a small dot on the imaginary line (B) where it crosses the brow bone.

From the outside corner of your nose through the middle of your pupil, place a small dot on the imaginary line (C), slightly above (A), where it crosses the brow bone. This will be the best position for your eyebrow arch.
Step 3
 
Following this guide,  you now have a very basic eyebrow shape. Using your eyebrow stick, connect the dots by drawing a brow that is thicker between (A) and (C) and a thinner between (C) and (B). 
Step 4
 
After drawing your eyebrow line,  use the brush on the end of our Indelible eyebrow stick to create the effect of little small hair like strokes. This will give your eyebrows a realistic and natural looking appearance.

Application Instructions for Glue-on Eyebrows:

  1. Apply a small amount of eyebrow adhesive to the skin on the brow line.
    Caution: Do not allow the adhesive to get in your eyes.
     
  2. Starting at the inner edge of the brow line, place the eyebrows on the brow line, forming the desired shape and arch. Using the teeth of a comb on an eyebrow brush, press gently on the eyebrows until the adhesive is dry. (Using a comb allows the adhesive to grab the base, without getting the glue on the hairs fibers).
  3. An eyebrow pencil or powdered eyebrow shadows can be used to enhance the color and finish the look.

Removing Glue-on Eyebrows

  1. Starting at the inner edge, very gently peel off the eyebrows. Use a cotton swab dampened with an oil based make up remover to soften the adhesive.
     
  2. Once removed, our adhesive remover (sold separately) may be used to clean any residue from the base of the eyebrows. Caution: Avoid contact of the adhesive remover with the eyes.
     
  3. After applying the adhesive remover, carefully rinse the brows with cool water and allow to air dry.

 

All content on this web site is protected by federal copyright laws and may not be reprinted or copied without our permission.